Home ﹥ Products > PCB Products

BK-810 HOLE AOI

我們是一家專精於光學產業的公司，於2016年開始獨立研發PCB HOLE AOI超高速孔位量測機。該產品不僅優於現有所有產品，而且可以以高速、穩定、簡易操作和保養的方式進行孔位量測。具體而言，我們的超高速孔位量測機可以在短時間內量測大量的孔位，且精度高。這些優勢能夠幫助客戶提高生產效率、降低生產成本等。

至今，我們的產品已獲得各大廠使用。其中，我們有許多客戶案例，他們使用我們的超高速孔位量測機後，成功提高了生產效率，同時還降低了生產成本。我們的產品獲得客戶的廣泛好評，這也證明了我們的超高速孔位量測機在光學產業中的價值和競爭力。

We are a company specializing in the optical industry, and we began independently researching and developing a PCB HOLE AOI ultra-high speed hole position measuring machine in 2016. This product not only surpasses all existing products, but can also measure hole positions quickly, steadily, easily and maintainably. Specifically, our ultra-high speed hole position measuring machine can measure a large number of hole positions in a short period of time with high precision. These advantages can help customers improve production efficiency and reduce production costs.

So far, our product has been adopted by major manufacturers. Among them, we have many customer cases where they successfully increased production efficiency and reduced production costs after using our ultra-high speed hole position measuring machine. Our product has received extensive praise from customers, which also proves the value and competitiveness of our ultra-high speed hole position measuring machine in the optical industry.

特點:

• 超高速全域掃描相機，單次掃描免拼圖，只需10-20S出結果。
• 高剛性的花崗岩基座，確保機台在高速使用時的穩定性。
• 採用相機固定設計，減少相機運動時引起的故障。
• 無調焦設計，無需考慮板厚問題，免去調焦時間，並減少相機運動時引起的故障。
• 獨家自動掀板設計，減小檢測平臺受力，保證機台精度。
• 採用LED光源，更省電，更環保，使用壽命更長。
• 一機多用，孔位分析和驗孔一次完成。
• 掃描後可自動記錄機台編號和主軸編號（業內首創)。
• 無需定位，一次可擺放多片同時驗孔及撈槽、板邊缺陷檢出。
• 完整的SPC分析資料，更容易找到鑽機問題所在

• Ultra-fast global scanning camera, providing results in just 10-20 seconds without the need for puzzle assembly.
• High-rigidity granite base ensures stability during high-speed operation.
• Camera-fixed design reduces potential failures caused by camera movement.
• No focusing required, eliminating the need to consider board thickness and reducing failures caused by camera movement.
• Exclusive automatic flip design minimizes stress on the inspection platform and ensures machine accuracy.
• LED light source for energy efficiency, environmental friendliness, and longer lifespan.
• Versatile functionality, allowing hole analysis and drilling inspection to be completed simultaneously.
• Automatically records machine and spindle numbers after scanning (industry-first).
• No need for positioning; multiple pieces can be placed and inspected simultaneously, including hole drilling, tapping, and board edge defect detection.
• Comprehensive SPC analysis data for easier identification of drilling machine issues.

硬體優勢（Hardware Advantage）

I. 一體成型相機（A integrated camera）
具有防塵防震，無裸露軟排線等優點，一體成型比傳統拼接相機精度更高.
It has the advantages of dust-proof, shockproof, no bare soft line, etc., and the integrated molding is more accurate than the traditional splicing camera.

II. 自動光源（Automatic light source）
光源亮度根據不同類型的板材及板厚自動調整，精准控制孔內亮度值，確保精度。
The brightness of the light source is automatically adjusted according to different types of plate and plate thickness, and the brightness value in the hole is accurately controlled to ensure the accuracy.

III. 獨家壓板設計（Exclusive pressure plate design）
獨家壓板設計有不易卡板、不掉板優點
Exclusive pressure plate design is not easy to card board, not off the board advantages.

IV. 導正輪快拆設計（Guide wheel quick disassembly design）
導正輪作為設備易耗品，更換一套只需幾分鐘，相比傳統式設計更便捷。
Guide wheel as equipment consumable, replacing a set of only a few minutes, compared with the traditional design is more convenient.

軟體優勢（Software advantage）

 簡易維修介面
Simple maintenance interface.
 波形自動校正功能
Waveform automatic correction function.
 強大毛刺檢出
Strong burr detected.
 成型多撈漏撈檢出
Routing Dimensional inspection.